Training

Training

YDE offers a wide variety of on-site OSHA, Safety, and DOT training courses.

Let's Not Meet By Accident!

Our training courses include but are not limited to the following:

Nationwide Service

nationwide-service

OSHA 10/30 Hour Construction or General Industry

The OSHA Outreach Training Program (OSHA 10 Hour and OSHA 30 Hour) provides training for workers and employers on the recognition, avoidance, abatement, and prevention of safety and health hazards in workplaces. The program also provides information regarding workers’ rights, employer responsibilities, and how to file a complaint. This is a voluntary program and does not meet training requirements for any OSHA standards.

Through this program, workers can attend 10-hour or 30-hour classes delivered by OSHA-authorized trainers (YDE). The 10-hour class is intended for entry level workers, while the 30-hour class is more appropriate for workers with some safety responsibility.

Permit Required Confined Space

This course is designed to meet OSHA’s Permit Required Confined Space Training requirements. It will also help students recognize, evaluate, prevent and abate safety and health hazards associated with confined space entry. Technical topics include the recognition of confined space hazards, basic information about instrumentation used to evaluate atmospheric hazards, and ventilation techniques. This course features practice with permit entry classification, program evaluation, and practical hands-on experience.

Topics include:

  • Permit space hazards
  • Entry procedures
  • Ventilation requirements
  • Personal protective equipment
  • Permit systems

Fork Lift

Powered industrial trucks, commonly called forklifts or lift trucks, are used in many industries, primarily to move materials and require training to operate. In this course, Forklift Operators will receive training in the safe use of a forklift to meet OSHA’s requirements.

Topics Include:

  • Operating instructions, warnings, and precautions for the types of truck the operator will be authorized to operate.
  • Differences between the truck and the automobile.
  • Truck controls and instrumentation: where they are located, what they do, and how they work.
  • Engine or motor operation.
  • Steering and maneuvering.
  • Visibility (including restrictions due to loading).
  • Fork and attachment adaptation, operation, and use limitations.
  • Vehicle capacity.
  • Vehicle stability.
  • Any vehicle inspection and maintenance that the operator will be required to perform.
  • Refueling and/or charging and recharging of batteries.
  • Operating limitations.

Hours of Service

This course is designed to help drivers and companies understand and remain compliant with Department of Transportation (DOT) Hours of Service (HOS) requirements. Most drivers must follow the HOS Regulations if they drive a commercial motor vehicle, or CMV. In general, a CMV is a vehicle that is used as part of a business and is involved in interstate commerce and fits any of these descriptions:

  • Weighs 10,001 pounds or more
  • Has a gross vehicle weight rating or gross combination weight rating of 10,001 pounds or more
  • Is designed or used to transport 16 or more passengers (including the driver) not for compensation
  • Is designed or used to transport 9 or more passengers (including the driver) for compensation
  • Is transporting hazardous materials in a quantity requiring placards

Fall Protection

Our Fall Protection Training is developed to your company’s specific procedures and complies with OSHA’s Fall Protect Training requirements.

Topics Include:

  • Duty to have fall protection.
  • Fall restraint systems. Fall arrest systems. Guard Rails.
  • Inspection, storage and maintenance of all systems.
  • Walking Working Surfaces.
  • Proper ladder set up/use.
  • Fall Protection Plans.

Lock Out Tag Out

Our Lockout Tagout Training describes the requirements and implementation of OSHA’s Control of Hazardous Energy standard. This course is intended for all “affected workers” and provides the essential information for “authorized workers” to safely tasks that involve electrical and non-electrical (moving/rotating, hydraulic, pneumatic, chemical, or thermal) energy sources.

Topics Include:

  • Identify the main types of hazardous energy and recognition.
  • Purpose of a lockout/tagout program.
  • Responsibilities of the workers who are affected by a lockout/tagout program.
  • Methods and procedures involved in an effective lockout/tagout program.

Supervisor Drug and Alcohol

The purpose of this training is to meet DOT requirements in teaching supervisors to identify circumstances and indicators that may create reasonable suspicion that a driver is using or under the influence of alcohol or drugs, supporting referral of an employee for testing. This course includes 1 Hour of Drug Training and 1 Hour of Alcohol Training.

HAZWOPER `{`40, 24, and 8 Hour`}`

HAZWOPER 40-Hour Training is required for workers whose jobs put them in contact with hazardous substances. Our HAZWOPER 40-Hour course meets the training requirements for workers, managers and supervisors who participate in hazardous waste operations and emergency response where they may be exposed to hazardous substances and health hazards.

HAZWOPER 24-Hour Training is required for workers of regulated site who have limited exposure to hazardous substances. Our HAZWOPER 24-Hour course meets training requirements for workers on a regulated site who have limited exposure to hazardous substances. This course is also intended for workers who regularly work on sites that have been monitored and fully characterized, where hazard exposures are under permissible exposure limits and published exposure limits, respirators are not necessary and there is no health hazard or the possibility of an emergency.

HAZWOPER 8-Hour Refresher Training is required annually for workers who complete an initial HAZWOPER 40-Hour Training or HAZWOPER 24-Hour Training. Our HAZWOPER 8-Hour Refresher course provides a refresher on the basic principles learned during the initial HAZWOPER 40-Hour Training or HAZWOPER 24-Hour Training.

Hazard Communication

This course covers OSHA’s Hazard Communication (HazCom) Standard while explaining what is required in an employer’s HazCom program. During training, students will learn the latest OSHA HazCom rules, including new GHS requirements for chemical classification, labeling, and Safety Data Sheets (SDSs).

Topics Include:
Required elements of a hazard communication plan

  • Defining hazardous chemicals under the Globally Harmonized System (GHS)
  • OSHA’s additional criteria for combustible dust and “Hazards Not Otherwise Classified”
  • Required elements of new Safety Data Sheets (SDSs)
  • Maintaining Safety Data Sheets at your facility
  • How to handle your trade secrets
  • Employee training requirements

CPR/First Aid

YDE Instructors are American Heart Association (AHA)

Heartsaver® First Aid CPR AED is an instructor-led course that teaches students critical skills needed to respond to and manage an emergency until emergency medical services arrives. Skills covered in this course include first aid; choking relief in adults, children, and infants; and what to do for sudden cardiac arrest in adults, children, and infants. This course teaches skills with the AHA’s research-proven practice-while-watching technique, which allows instructors to observe the students, provide feedback, and guide the students’ learning of skills.

Heartsaver® First Aid is an instructor-led course that teaches students critical skills to respond to and manage an emergency in the first few minutes until emergency medical services arrives. Students learn duties and responsibilities of first aid rescuers; first aid actions for medical emergencies, including severe choking, heart attack, and stroke; and skills for handling injury and environmental emergencies, including external bleeding, broken bones and sprains, and bites and stings.

Heartsaver Bloodborne Pathogens is a classroom course that teaches employees how to protect themselves and others from being exposed to blood or blood-containing materials.

Basic Life Support (BLS) is an instructor-led course that reinforces healthcare professionals’ understanding of the importance of early CPR and defibrillation, basic steps of performing CPR, relieving choking, and using an AED; and the role of each link in the Chain of Survival.

Respiratory Protection

Our Respiratory Protection Training is developed specific to your written Respiratory Program requirements as well as OSHA’s training requirements for workers who may use respiratory protection during routine and emergency situations.

Arc Flash Safety

Arc Flash Safety Training is a comprehensive safety training designed to protect workers from electrical hazards faced in the workplace every day. Our Arc Flash Safety Training Course will provide workers with the knowledge to make sound decisions and institute safe work practices resulting in a much safer facility. Workers attending this Arc Flash Safety course will learn safe work practices and procedures and as a result, be able to recognize dangerous situations and avoid hazards before an incident occurs. They will learn the safe approach distances to exposed electrical conductors and by class end they’ll be able to determine the proper Personal Protective Equipment (PPE) for any situation or working condition encountered.

DOT HAZMAT

Our DOT HAZMAT Training is developed specific to your DOT HAZMAT procedures as well as DOT’s training requirements for “hazmat employees”.

US DOT “hazmat employee” training rules apply to any company with employees who perform any function in any way regulated by the US DOT Hazardous Materials Regulations (HMR). This includes any company with employees who:

  • Offer hazardous materials for transportation;
  • Package, mark, or label hazardous materials for transportation;
  • Load or unload hazardous materials transport vehicles;
  • Transport hazardous materials;
  • Receive and forward packages containing hazardous materials;
  • Manufacture packaging for use in transporting hazardous materials; and
  • Test hazardous material packaging

If there is a DOT or Safety training course that you need that is not listed, just contact us.  YDE is sure to have a safety professional with the qualifications to deliver the training you need.

Training

Training

YDE is here to meet your training needs. We offer huge list of DOT and Safety training.

View Details

Safety & DOT Compliance

Safety & DOT Compliance

Health, Safety Program Preventative Maintenance - DOT & Risk Management

View Details

Consulting Services

Consulting Services

Accident/Incident Investigation, Expert Witness, Workers’ Comp Management

View Details

Pre-Qualification Submission

Pre-Qualification Submission

YDE offers contractor and Subcontractor Pre-qualification and verification assistance.

View Details

Contact us now for a FREE QUICK QUOTE